Dieser Inhalt ist derzeit in seiner Originalsprache verfügbar.
ThinkGrow 12'Daisy chain control cable
Modell / Artikelnummer: ECS-7
ThinkGrow ECS-7 12 ft Daisy Chain Control Cable for LMA-T Bridges
- Model
- ECS-7
- Length
- 12 ft (3.66 m)
- Connector
- RJ12 to 4-pin IP65 threaded waterproof
- Compatible Fixtures
- ThinkGrow Model-I, Model-I Plus, Model-H, Model-H Plus, Model-V, Model-W
Nur zum Vergleich. Fordern Sie Ihren aktuellen Großhandelspreis, die Verfügbarkeit und die Lieferbedingungen an.
Keine Zahlung erforderlich. Ein Gespräch über Ihre Bedürfnisse.
Noch ein paar weitere Informationen zu diesem Produkt
ThinkGrow ECS-7 12 ft Daisy Chain Control Cable for LMA-T Bridges
Product details
- ThinkGrow's ECS-7 is the 12 ft (3.66 m) low-voltage control cable.
- It bridges a TrolMaster LMA-T lighting adapter to ThinkGrow's Model-I, Model-H, Model-V, and Model-W LED fixtures.
- RJ12 on the controller side, a 4-pin IP65 threaded waterproof connector on the fixture side.
- Daisy-chain pass-through at every fixture lets a single controller line sync dim levels across an entire room.
- Where the ECS-7 Sits in a TrolMaster Daisy Chain
- Standard layout: Hydro-X controller into LMA-T adapter into ECS-7 to first fixture into ECS-7 fixture-to-fixture down the row.
- Growers typically place the LMA-T near the controller and run the ECS-7 along the same ceiling truss as the power cords.
- The IP65 fixture connector matters when the room runs evaporative cooling or any supplemental humidity.
- Water on a non-sealed signal connector eventually corrodes pins and trips intermittent dimming bugs that look like driver failures.
- Signal cable only, not power.
- Cable length: 12 ft (3.66 m), enough to bridge LMA-T to first fixture or fixture-to-fixture in a typical row
- Connectors: RJ12 controller-side, 4-pin IP65 threaded waterproof fixture-side
- Function: Daisy-chain control signal — syncs dim levels and schedules across the run
- Compatible fixtures: ThinkGrow Model-I, Model-I Plus, Model-H, Model-H Plus, Model-V, Model-W
- Bridge requirement: Pairs with TrolMaster LMA-T adapter on the Hydro-X / Hydro-X Pro side
- Technical Specifications
Spezifikationen
- Model
- ECS-7
- Length
- 12 ft (3.66 m)
- Connector
- RJ12 to 4-pin IP65 threaded waterproof
- Compatible Fixtures
- ThinkGrow Model-I, Model-I Plus, Model-H, Model-H Plus, Model-V, Model-W
- Standard layout
- Hydro-X controller into LMA-T adapter into ECS-7 to first fixture into ECS-7 fixture-to-fixture down the row.
- Cable length
- 12 ft (3.66 m), enough to bridge LMA-T to first fixture or fixture-to-fixture in a typical row
- Connectors
- RJ12 controller-side, 4-pin IP65 threaded waterproof fixture-side
- Compatible fixtures
- ThinkGrow Model-I, Model-I Plus, Model-H, Model-H Plus, Model-V, Model-W
Lass es uns für dein Projekt zum Laufen bringen
Bitte geben Sie in Ihrer Anfrage die gewünschte Menge, den Lieferort, die Anbaufläche sowie eventuelle Spannungs- oder Steckeranforderungen an. Spezifikationen, Verfügbarkeit, Versand- und Garantiebedingungen werden in Ihrem schriftlichen Angebot bestätigt.
Referenzumrechnung unter Verwendung des gespeicherten Wechselkurses vom 15.11.2026. Die umgerechneten Beträge stellen kein Angebot dar.
Mehr Möglichkeiten für Ihren Raum
Yield Lab Professional Series Double Ended Grow Light Reflector
Yield Lab Professional Series 120/220v 630w Dual Bulb CMH Open Wing Reflector/Ballast
Yield Lab Pro Series 120/220V 1000W Double Ended Complete Grow Light Kit
Fragen und Diskussion
Haben Sie eine Frage oder möchten Sie etwas Nützliches teilen? Starten Sie das Gespräch.