Dieser Inhalt ist derzeit in seiner Originalsprache verfügbar.
BeleuchtungszubehörGroßhandelsanfrage
Sero Bus Cable, 1 ft
Modell / Artikelnummer: 705135
Sero 1 ft Bus Cable for Side-by-Side Modules
- Type
- System bus cable
- Length
- 1 ft
- Compatibility
- Sero System
QuellenreferenzpreisEUR 10.71
Nur zum Vergleich. Fordern Sie Ihren aktuellen Großhandelspreis, die Verfügbarkeit und die Lieferbedingungen an.
Keine Zahlung erforderlich. Ein Gespräch über Ihre Bedürfnisse.
Direkter WerkssupportMehr als 15 Jahre Erfahrung
EIN GENAUERER BLICK
Noch ein paar weitere Informationen zu diesem Produkt
Sero 1 ft Bus Cable for Side-by-Side Modules
Product details
- A controller and its add-on modules talk to each other over a shared system bus.
- When two of those units mount next to each other, a long cable only adds clutter.
- This Sero cable spans just 1 foot.
- It bridges neighboring components on a panel, shelf or wall board.
- With so little length, there is no coil to tuck away behind the equipment.
- Short runs also leave less cable exposed to bumps, carts and spray.
- Sero states that only its approved bus cables should connect system components.
- Using the matched cable keeps the connection in line with what the system was designed for.
- Each cable links one component to the next.
- A row of modules needs one cable for every gap between them.
- Plan the layout so each pair of units sits close enough for this short span.
- Wiring a Sero System Panel with Short Links
- Mount the components first so the spacing is fixed before any cable goes in.
- Power the system down before plugging in or removing a bus cable.
- Seat each connector fully until it stops, then give it a light tug to confirm it holds.
- Keep the cable flat against the panel rather than looped in the air.
- Avoid bending it sharply right at the plug, where strain does the most damage.
- Label both ends when several modules share one board.
- Those labels save time later when a unit needs to come out for service.
- Keep bus cables apart from mains power wiring where the layout allows.
- Restore power and check that the controller sees every connected component.
- Inspect connectors during routine maintenance for dust, moisture or corrosion.
- Replace a cable that shows a cracked jacket or a loose plug.
- 1 ft Length: Links components mounted side by side.
- No Excess Slack: Keeps panels clean and tidy.
- Sero Approved: Matched to Sero System components.
- One Link per Gap: Connects one unit to the next.
- Less Exposure: Short run stays out of the way.
Spezifikationen
- Type
- System bus cable
- Length
- 1 ft
- Compatibility
- Sero System
Lass es uns für dein Projekt zum Laufen bringen
Bitte geben Sie in Ihrer Anfrage die gewünschte Menge, den Lieferort, die Anbaufläche sowie eventuelle Spannungs- oder Steckeranforderungen an. Spezifikationen, Verfügbarkeit, Versand- und Garantiebedingungen werden in Ihrem schriftlichen Angebot bestätigt.
Referenzumrechnung unter Verwendung des gespeicherten Wechselkurses vom 15.11.2026. Die umgerechneten Beträge stellen kein Angebot dar.
WEITER ERKUNDEN
Alle Produkte ansehenMehr Möglichkeiten für Ihren Raum
Beleuchtungszubehör
Yield Lab Professional Series Double Ended Grow Light Reflector
QuellenangabeEUR 58.83
Beleuchtungszubehör
Yield Lab Professional Series 120/220v 630w Dual Bulb CMH Open Wing Reflector/Ballast
QuellenangabeEUR 270.89
Beleuchtungszubehör
Yield Lab Pro Series 120/220V 1000W Double Ended Complete Grow Light Kit
QuellenangabeEUR 135.85
Fragen und Diskussion
Haben Sie eine Frage oder möchten Sie etwas Nützliches teilen? Starten Sie das Gespräch.