Ein vielversprechenderer Weg zum Wachstum. Großhandel direkt ab Werk. Mehr als 15 Jahre wachsende Expertise

Dieser Inhalt ist derzeit in seiner Originalsprache verfügbar.

Belüftung & KlimaGroßhandelsanfrage

Ruck 8 Back Draught Dampner

Modell / Artikelnummer: 149394

How the 8 Inch Back Draught Damper Seals an Idle Duct

Duct Size
8 in
Mounting
Horizontal or vertical
Operation
Airflow-opened, spring-closed
Horizontal or Vertical Mounting
Spring loading means it does not depend on gravity to close.
QuellenreferenzpreisEUR 20.84

Nur zum Vergleich. Fordern Sie Ihren aktuellen Großhandelspreis, die Verfügbarkeit und die Lieferbedingungen an.

Keine Zahlung erforderlich. Ein Gespräch über Ihre Bedürfnisse.

Direkter WerkssupportMehr als 15 Jahre Erfahrung
EIN GENAUERER BLICK

Noch ein paar weitere Informationen zu diesem Produkt

How the 8 Inch Back Draught Damper Seals an Idle Duct

Product details

  • Galvanized sheet steel housing, spring-loaded aluminium flaps, rubber seal at the seat.
  • The flaps are held closed by spring pressure and opened by the fan, which means there is nothing to wire and nothing to fail electrically.
  • On an 8 in duct it is the simplest way to stop reverse flow through an idle run.
  • Mounting a Backdraft Shutter in the Right Place
  • Because the flaps are sprung rather than gravity-hung, it works mounted horizontally or vertically.
  • Put it downstream of the fan with the flaps opening the way the air goes.
  • The honest cost is a small static pressure penalty, which on an 8 in run is usually irrelevant but is real.
  • Check the rubber seat for dust when you service the fan; that is what makes a damper leak.
  • If the flaps chatter at low speed, the fan is running below the pressure they need to stay open.
  • Nudge the speed up a step.
  • Spring-Loaded Aluminium Flaps: Open on airflow and close under spring pressure, with nothing to power.
  • Rubber Seal: Closes the gap at the seat so a stopped duct actually stays shut.
  • Galvanized Steel Housing: Corrosion-resistant in the damp air an exhaust run carries.
  • Horizontal or Vertical Mounting: Spring loading means it does not depend on gravity to close.
  • 8 in Duct Fit: Matches Ruck 8 in components and standard 8 in ducting.
  • Fully Mechanical: No wiring, no actuator and no control signal to lose.
  • Technical Specifications

Spezifikationen

Duct Size
8 in
Mounting
Horizontal or vertical
Operation
Airflow-opened, spring-closed
Horizontal or Vertical Mounting
Spring loading means it does not depend on gravity to close.

Lass es uns für dein Projekt zum Laufen bringen

Bitte geben Sie in Ihrer Anfrage die gewünschte Menge, den Lieferort, die Anbaufläche sowie eventuelle Spannungs- oder Steckeranforderungen an. Spezifikationen, Verfügbarkeit, Versand- und Garantiebedingungen werden in Ihrem schriftlichen Angebot bestätigt.

Referenzumrechnung unter Verwendung des gespeicherten Wechselkurses vom 15.11.2026. Die umgerechneten Beträge stellen kein Angebot dar.

LASST UNS GEMEINSAM WACHSEN

Fragen und Diskussion

0

Haben Sie eine Frage oder möchten Sie etwas Nützliches teilen? Starten Sie das Gespräch.

WEITER ERKUNDEN

Mehr Möglichkeiten für Ihren Raum

Alle Produkte ansehen
DER BEGINN VON ETWAS GUTEM

Lass uns dein Projekt ans Licht bringen.

Schildern Sie uns kurz Ihre Anforderungen. Wir nutzen Ihre Angaben, um Ihnen ein passendes Angebot für den Großhandel zu unterbreiten.

Ihre Produktliste

Keine Zahlung. Keine Verpflichtung. Nur ein hilfreiches Gespräch.