Dieser Inhalt ist derzeit in seiner Originalsprache verfügbar.
Ruck 4 Back Draught Dampner
Modell / Artikelnummer: 148389
How the 4 Inch Back Draught Damper Seals an Idle Duct
- Duct Size
- 4 in
- Mounting
- Horizontal or vertical
- Operation
- Airflow-opened, spring-closed
- Horizontal or Vertical Mounting
- Spring loading means it does not depend on gravity to close.
Nur zum Vergleich. Fordern Sie Ihren aktuellen Großhandelspreis, die Verfügbarkeit und die Lieferbedingungen an.
Keine Zahlung erforderlich. Ein Gespräch über Ihre Bedürfnisse.
Noch ein paar weitere Informationen zu diesem Produkt
How the 4 Inch Back Draught Damper Seals an Idle Duct
Product details
- This is a one-way gate in the duct.
- Spring-loaded aluminium flaps lift when the fan pushes air and drop shut when it stops, with a rubber seal closing the gap at rest.
- The housing is galvanized sheet steel.
- On a 4 in run it weighs half a pound and adds about 3.5 in of depth.
- Mounting a Backdraft Shutter in the Right Place
- It mounts horizontally or vertically, which is unusual for a gravity damper and comes from the spring rather than relying on weight.
- Fit it downstream of the fan with the flaps opening in the direction of flow.
- Understand the cost: flaps sitting in the airstream take a small bite out of static pressure, and on a small fan that is not nothing.
- Keep the seat clean, because dust on the rubber is what stops a damper closing fully.
- On a small run the flaps are light enough to open at low fan speed without stalling.
- Spring-Loaded Aluminium Flaps: Open on airflow and close under spring pressure, with nothing to power.
- Rubber Seal: Closes the gap at the seat so a stopped duct actually stays shut.
- Galvanized Steel Housing: Corrosion-resistant in the damp air an exhaust run carries.
- Horizontal or Vertical Mounting: Spring loading means it does not depend on gravity to close.
- 4 in Duct Fit: Matches Ruck 4 in components and standard 4 in ducting.
- Fully Mechanical: No wiring, no actuator and no control signal to lose.
- Technical Specifications
Spezifikationen
- Duct Size
- 4 in
- Mounting
- Horizontal or vertical
- Operation
- Airflow-opened, spring-closed
- Horizontal or Vertical Mounting
- Spring loading means it does not depend on gravity to close.
Lass es uns für dein Projekt zum Laufen bringen
Bitte geben Sie in Ihrer Anfrage die gewünschte Menge, den Lieferort, die Anbaufläche sowie eventuelle Spannungs- oder Steckeranforderungen an. Spezifikationen, Verfügbarkeit, Versand- und Garantiebedingungen werden in Ihrem schriftlichen Angebot bestätigt.
Referenzumrechnung unter Verwendung des gespeicherten Wechselkurses vom 15.11.2026. Die umgerechneten Beträge stellen kein Angebot dar.
Mehr Möglichkeiten für Ihren Raum
Yield Lab 6 inch 440 CFM Duct Inline Fan with 6" Carbon Filter Ducting and Clamps
Yield Lab 6 Inch 440 CFM Charcoal Filter and Duct Fan Combo Kit
Fragen und Diskussion
Haben Sie eine Frage oder möchten Sie etwas Nützliches teilen? Starten Sie das Gespräch.