Ein vielversprechenderer Weg zum Wachstum. Großhandel direkt ab Werk. Mehr als 15 Jahre wachsende Expertise

Dieser Inhalt ist derzeit in seiner Originalsprache verfügbar.

Belüftung & KlimaGroßhandelsanfrage

Ruck 12 Back Draught Dampner

Modell / Artikelnummer: 149477

How the 12 Inch Back Draught Damper Seals an Idle Duct

Nothing about it is powered
airflow alone opens it and spring pressure alone closes it.
Duct Size
12 in
Mounting
Horizontal or vertical
Operation
Airflow-opened, spring-closed
QuellenreferenzpreisEUR 35.33

Nur zum Vergleich. Fordern Sie Ihren aktuellen Großhandelspreis, die Verfügbarkeit und die Lieferbedingungen an.

Keine Zahlung erforderlich. Ein Gespräch über Ihre Bedürfnisse.

Direkter WerkssupportMehr als 15 Jahre Erfahrung
EIN GENAUERER BLICK

Noch ein paar weitere Informationen zu diesem Produkt

How the 12 Inch Back Draught Damper Seals an Idle Duct

Product details

  • At 12 in the reverse draught through a stopped fan is substantial, and in winter it is expensive.
  • The damper blocks it with spring-loaded aluminium flaps seating on a rubber seal, inside a galvanized sheet steel housing.
  • Nothing about it is powered: airflow alone opens it and spring pressure alone closes it.
  • Mounting a Backdraft Shutter in the Right Place
  • Horizontal or vertical mounting both work, thanks to the spring rather than gravity holding the flaps shut.
  • Install it after the fan, flaps opening downstream.
  • There is a small pressure penalty to accept, and at this size it is a fair trade against the heat a stopped fan otherwise loses.
  • Dust on the rubber seat is the usual failure mode, so wipe it when you service the run.
  • A flap that rattles at low output means the fan is not making enough pressure to hold it open cleanly.
  • Spring-Loaded Aluminium Flaps: Open on airflow and close under spring pressure, with nothing to power.
  • Rubber Seal: Closes the gap at the seat so a stopped duct actually stays shut.
  • Galvanized Steel Housing: Corrosion-resistant in the damp air an exhaust run carries.
  • Horizontal or Vertical Mounting: Spring loading means it does not depend on gravity to close.
  • 12 in Duct Fit: Matches Ruck 12 in components and standard 12 in ducting.
  • Fully Mechanical: No wiring, no actuator and no control signal to lose.
  • Technical Specifications

Spezifikationen

Duct Size
12 in
Mounting
Horizontal or vertical
Operation
Airflow-opened, spring-closed
Nothing about it is powered
airflow alone opens it and spring pressure alone closes it.
Horizontal or Vertical Mounting
Spring loading means it does not depend on gravity to close.

Lass es uns für dein Projekt zum Laufen bringen

Bitte geben Sie in Ihrer Anfrage die gewünschte Menge, den Lieferort, die Anbaufläche sowie eventuelle Spannungs- oder Steckeranforderungen an. Spezifikationen, Verfügbarkeit, Versand- und Garantiebedingungen werden in Ihrem schriftlichen Angebot bestätigt.

Referenzumrechnung unter Verwendung des gespeicherten Wechselkurses vom 15.11.2026. Die umgerechneten Beträge stellen kein Angebot dar.

LASST UNS GEMEINSAM WACHSEN

Fragen und Diskussion

0

Haben Sie eine Frage oder möchten Sie etwas Nützliches teilen? Starten Sie das Gespräch.

WEITER ERKUNDEN

Mehr Möglichkeiten für Ihren Raum

Alle Produkte ansehen
DER BEGINN VON ETWAS GUTEM

Lass uns dein Projekt ans Licht bringen.

Schildern Sie uns kurz Ihre Anforderungen. Wir nutzen Ihre Angaben, um Ihnen ein passendes Angebot für den Großhandel zu unterbreiten.

Ihre Produktliste

Keine Zahlung. Keine Verpflichtung. Nur ein hilfreiches Gespräch.