Dieser Inhalt ist derzeit in seiner Originalsprache verfügbar.
Quest Duct Kit (Hi-E 195)
Modell / Artikelnummer: 4039132
Quest Hi-E Dry Duct Kit for Ducted Hi-E Dry Installs
- Compatible models
- Quest Hi-E Dry 120 (4036730), Quest Hi-E Dry 195 (4036710)
Nur zum Vergleich. Fordern Sie Ihren aktuellen Großhandelspreis, die Verfügbarkeit und die Lieferbedingungen an.
Keine Zahlung erforderlich. Ein Gespräch über Ihre Bedürfnisse.
Noch ein paar weitere Informationen zu diesem Produkt
Quest Hi-E Dry Duct Kit for Ducted Hi-E Dry Installs
Product details
- This is the factory duct kit for the Quest Hi-E Dry 120 and Hi-E Dry 195 portable dehumidifiers, part number 4039132.
- A duct cover plate blocks off the opening the ducted setup no longer uses.
- Foam tape and a foam tape seal close the gaps between collar and cabinet so air goes where the duct sends it.
- Twelve 6-20 x 3/4 in screws and six 6-20 x 1/2 in screws mount everything to the cabinet.
- The installation sheet for the kit is TS-1059, written for the Hi-E series.
- The compatible units are the Hi-E Dry 120, Quest part 4036730, and the Hi-E Dry 195, part 4036710.
- Nothing else is needed from the dehumidifier side.
- Flex or rigid duct in matching sizes completes the run.
- Why Growers Fit a Dehumidifier Duct Kit
- A ducted dehumidifier can sit outside the canopy, in a hallway, mechanical closet or the plenum above.
- That keeps its heat and noise out of the room and frees floor space for plants.
- Dry supply air can then be thrown where airflow is weakest, which helps flatten pockets of high humidity.
- Keep duct runs short and smooth, since every bend and foot of flex adds static pressure and trims moisture removal.
- Seal every joint with foil tape so the unit is not pulling air from the attic or a wall cavity.
- Leave service access to the filter, because a ducted unit is easy to forget once it is out of sight.
- Plan the drain line at the same time, since a remote unit still needs a path for condensate.
- The kit carries a warning that a licensed, qualified electrician should do the work, so budget the install accordingly.
- 10 in Supply Collar: A round collar on the supply side connects standard 10 in duct to deliver dry air.
- Block-Off Plate: Seals the cabinet opening that a ducted layout no longer uses.
- Foam Seals and Hardware: Foam tape, foam seal and two sizes of screws make an airtight, secure fit.
- Fits Hi-E Dry 120 and 195: Made for Quest parts 4036730 and 4036710, the two Hi-E Dry portable units.
- Technical Specifications
Spezifikationen
- Compatible models
- Quest Hi-E Dry 120 (4036730), Quest Hi-E Dry 195 (4036710)
Lass es uns für dein Projekt zum Laufen bringen
Bitte geben Sie in Ihrer Anfrage die gewünschte Menge, den Lieferort, die Anbaufläche sowie eventuelle Spannungs- oder Steckeranforderungen an. Spezifikationen, Verfügbarkeit, Versand- und Garantiebedingungen werden in Ihrem schriftlichen Angebot bestätigt.
Referenzumrechnung unter Verwendung des gespeicherten Wechselkurses vom 15.11.2026. Die umgerechneten Beträge stellen kein Angebot dar.
Mehr Möglichkeiten für Ihren Raum
Yield Lab 6 inch 440 CFM Duct Inline Fan with 6" Carbon Filter Ducting and Clamps
Yield Lab 6 Inch 440 CFM Charcoal Filter and Duct Fan Combo Kit
Fragen und Diskussion
Haben Sie eine Frage oder möchten Sie etwas Nützliches teilen? Starten Sie das Gespräch.