Dieser Inhalt ist derzeit in seiner Originalsprache verfügbar.
Quest 70 Pint - Hanging Bracket Kit
Modell / Artikelnummer: 4036695
Everything in the Quest 70 Hanging Kit, Item by Item
- Bracket dimensions
- 16.50 x 2.19 x 1.00 in
- Bracket shape
- L-shaped, cut to hug the unit
- Mounting
- Eyebolts into structure, not drywall or a suspended grid
- Two L-shaped brackets
- 16.50 by 2.19 by 1.00 in, cut to hug the body of the unit.
Nur zum Vergleich. Fordern Sie Ihren aktuellen Großhandelspreis, die Verfügbarkeit und die Lieferbedingungen an.
Keine Zahlung erforderlich. Ein Gespräch über Ihre Bedürfnisse.
Noch ein paar weitere Informationen zu diesem Produkt
Everything in the Quest 70 Hanging Kit, Item by Item
Product details
- The Quest 70 hanging kit carries five distinct parts.
- Two brackets, four eyebolts, four cables with carabiners, and a quarter inch clip on 8 ft of nylon rope.
- That rope and clip are the two pieces most often left off a parts list.
- They are what the kit uses for the drain line rather than for the unit itself.
- The brackets are the part worth understanding.
- They are L-shaped and measure 16.50 by 2.19 by 1.00 in, and they are cut to hug the body of the machine rather than to bolt through it.
- Two of them take the load and the four cables carry it up to the eyebolts.
- That is a four point suspension, which is what keeps a dehumidifier level when it is running.
- Level matters more on a dehumidifier than on a fan.
- The condensate has to reach the drain.
- A unit hanging a few degrees out holds water in the pan and eventually pushes it somewhere else.
- Set the four cables to equal length before the machine goes up, not after.
- What to Check Before Fitting a Dehumidifier Ceiling Mount
- Fitment first, because this kit is model specific in a way the part name does not say.
- It fits the Quest 70, part 4033750, and the Quest 70 50-Hz build, part 4033810, and nothing else.
- The larger Quest units take a different overhead bracket under its own part number.
- Second, the structure above the machine.
- The ceiling has to be verified against the operating weight of the machine.
- Eyebolts go into structure, never into drywall or a suspended grid, so find the joists first.
- Third on the list comes the drain.
- A hanging unit has to gravity-feed its condensate somewhere, and that line needs a continuous fall from the machine to wherever it goes.
- Work that path out before the eyebolts go in, because moving a drain afterwards means moving the machine.
- Part 4036695: The part number for this kit specifically.
- Two L-shaped brackets: 16.50 by 2.19 by 1.00 in, cut to hug the body of the unit.
- Four cables with carabiners: A four point suspension, which is what holds the unit level.
- Four eyebolts: Into structure rather than drywall or a suspended ceiling grid.
- Clip and 8 ft of nylon rope: Included in the kit, and the piece most often overlooked.
- Quest 70 only: Parts 4033750 and 4033810; larger units take a different bracket.
Spezifikationen
- Bracket shape
- L-shaped, cut to hug the unit
- Bracket dimensions
- 16.50 x 2.19 x 1.00 in
- Mounting
- Eyebolts into structure, not drywall or a suspended grid
- Two L-shaped brackets
- 16.50 by 2.19 by 1.00 in, cut to hug the body of the unit.
Lass es uns für dein Projekt zum Laufen bringen
Bitte geben Sie in Ihrer Anfrage die gewünschte Menge, den Lieferort, die Anbaufläche sowie eventuelle Spannungs- oder Steckeranforderungen an. Spezifikationen, Verfügbarkeit, Versand- und Garantiebedingungen werden in Ihrem schriftlichen Angebot bestätigt.
Referenzumrechnung unter Verwendung des gespeicherten Wechselkurses vom 15.11.2026. Die umgerechneten Beträge stellen kein Angebot dar.
Mehr Möglichkeiten für Ihren Raum
Yield Lab Professional Series Double Ended Grow Light Reflector
Yield Lab Professional Series 120/220v 630w Dual Bulb CMH Open Wing Reflector/Ballast
Yield Lab Pro Series 120/220V 1000W Double Ended Complete Grow Light Kit
Fragen und Diskussion
Haben Sie eine Frage oder möchten Sie etwas Nützliches teilen? Starten Sie das Gespräch.