Dieser Inhalt ist derzeit in seiner Originalsprache verfügbar.
Hydroponik & BewässerungGroßhandelsanfrage
Netafim 3/4in Insert Coupling with Rings - 100 Pack
Modell / Artikelnummer: 32500-021530
Netafim 3/4in Insert Coupling with Rings
- Nominal Size
- 3/4 inch
- Fitting Type
- Straight coupling, barb x barb
- Pipe Inside Diameter
- 22 mm
- Pipe Wall Thickness
- 1.5 mm
QuellenreferenzpreisEUR 83.91
Nur zum Vergleich. Fordern Sie Ihren aktuellen Großhandelspreis, die Verfügbarkeit und die Lieferbedingungen an.
Keine Zahlung erforderlich. Ein Gespräch über Ihre Bedürfnisse.
Direkter WerkssupportMehr als 15 Jahre Erfahrung
EIN GENAUERER BLICK
Noch ein paar weitere Informationen zu diesem Produkt
Netafim 3/4in Insert Coupling with Rings
Product details
- Supply pipe and heavy wall dripline both get cut, extended and rerouted over the life of a system.
- This straight insert fitting joins two pieces end to end so the run carries on as one line.
- Each half of the coupling carries a series of raised rings.
- Those rings are the barb, and each one bites into the inside of the pipe as it slides on.
- Several rings in a row give the joint more grip than a single ridge.
- Its brown color and part number match the 25 mm barb coupling in Netafim's connector catalog.
- Netafim lists that size for pipe with a 22 mm inside diameter and a 1.5 mm wall.
- Netafim describes the barb connector body as a UV and chemical resistant polymer.
- That matters on exposed runs and in lines that carry fertilizer.
- The fitting is a single molded piece with no nuts, sleeves or loose seals.
- Installation takes a sharp cutter and hand pressure, nothing more.
- A bag of 100 covers a full season of repairs and new lateral work across a large site.
- Making a Barbed Pipe Coupling Hold
- Turn the zone off and drain the pressure before cutting the line.
- Cut out any damaged section and square both pipe ends.
- A clean, straight cut lets the pipe seat evenly over all the rings.
- Check the pipe size against the fitting before pushing it on.
- Warm stiff pipe in the sun or in warm water so it stretches over the rings more easily.
- Push one pipe end onto the coupling with a slight twisting motion until it covers every ring.
- Repeat on the other side so both pipes meet near the middle.
- Do not use oil or soap on the barbs.
- A dry fit grips better.
- Turn the zone on slowly and watch both joints at working pressure.
- A small leak usually means the pipe did not slide fully over the last ring.
- On buried or exposed pipe, keep the joint straight and out of tension so the pipe does not pull back off.
- Flush the line after a repair to clear out soil and pipe shavings.
- Store spare couplings in their bag, away from sun, until they are needed.
- Ringed Barbs: Multiple raised rings grip the inside of the pipe.
Spezifikationen
- Fitting Type
- Straight coupling, barb x barb
- Nominal Size
- 3/4 inch
- Pipe Inside Diameter
- 22 mm
- Pipe Wall Thickness
- 1.5 mm
- Color
- Brown
- Material
- UV and chemical resistant polymer
- Pack Quantity
- 100
Lass es uns für dein Projekt zum Laufen bringen
Bitte geben Sie in Ihrer Anfrage die gewünschte Menge, den Lieferort, die Anbaufläche sowie eventuelle Spannungs- oder Steckeranforderungen an. Spezifikationen, Verfügbarkeit, Versand- und Garantiebedingungen werden in Ihrem schriftlichen Angebot bestätigt.
Referenzumrechnung unter Verwendung des gespeicherten Wechselkurses vom 15.11.2026. Die umgerechneten Beträge stellen kein Angebot dar.
WEITER ERKUNDEN
Alle Produkte ansehenMehr Möglichkeiten für Ihren Raum
Hydroponik & Bewässerung
Yield Lab 600W HPS+MH Cool Tube Hood Reflector Grow Light Kit
QuellenangabeEUR 199.27
Hydroponik & Bewässerung
Yield Lab 600W HPS+MH Air Cool Tube Reflector Digital Grow Light Kit
QuellenangabeEUR 181.15
Hydroponik & Bewässerung
Yield Lab 600w HPS Air Cool Tube Digital Dimming Grow Light Kit
QuellenangabeEUR 172.09
Fragen und Diskussion
Haben Sie eine Frage oder möchten Sie etwas Nützliches teilen? Starten Sie das Gespräch.