Dieser Inhalt ist derzeit in seiner Originalsprache verfügbar.
Hydroponik & BewässerungGroßhandelsanfrage
HydroLogic Evolution Wall Mount Bracket · Stainless, RO1000
Modell / Artikelnummer: 741585
What the Evolution Wall Mount Bracket Holds
- Dimensions
- 11.375 W x 4.25 H x 6.1875 D in
- Material
- Stainless steel, heavy duty
- Weight
- 1.122 lbs
- Mounting Note
- Fix to studs or anchors rated past the loaded system weight
QuellenreferenzpreisEUR 83.31
Nur zum Vergleich. Fordern Sie Ihren aktuellen Großhandelspreis, die Verfügbarkeit und die Lieferbedingungen an.
Keine Zahlung erforderlich. Ein Gespräch über Ihre Bedürfnisse.
Direkter WerkssupportMehr als 15 Jahre Erfahrung
EIN GENAUERER BLICK
Noch ein paar weitere Informationen zu diesem Produkt
What the Evolution Wall Mount Bracket Holds
Product details
- A filter stack, off the floor.
- It measures 11.375 by 4.25 by 6.1875 in and weighs 1.122 lbs.
- It replaces the older HL 10057 part.
- Why Heavy Duty Stainless Suits the Wall Behind an RO Unit
- That wall gets wet and stays wet.
- Plated steel rusts there, which is the whole reason for the material choice.
- The more important number is not the bracket though.
- It is what the bracket is screwed into.
- Full of water an Evolution stack weighs far more than the bracket does.
- The fixing carries the job: find studs, or use anchors rated well past the loaded weight.
- Screws and washers come in the box, which is worth knowing because the ones most people reach for are plated.
- Wall anchors are not included, since the right anchor depends on what you are drilling into.
- HydroLogic describes the part as mounting an Evolution-RO to a variety of surfaces rather than naming one model.
- It is not tied to the RO1000 alone.
- Gets the system off the floor: Wall mounted, which is usually where an RO stack belongs.
- Heavy duty stainless: The wall behind an RO unit stays wet.
- Plated steel does not last.
- Screws and washers included: The fasteners most people would otherwise grab are plated steel.
- Replaces HL 10057: The older bracket part number, superseded by this one.
- Not RO1000 only: HydroLogic describes it as mounting an Evolution-RO generally.
- Anchors are not included: The right anchor depends on the wall, so that choice is yours.
- Dimensions: 11.375 by 4.25 by 6.1875 in.
- Technical Specifications
Spezifikationen
- Material
- Stainless steel, heavy duty
- Dimensions
- 11.375 W x 4.25 H x 6.1875 D in
- Weight
- 1.122 lbs
- Mounting Note
- Fix to studs or anchors rated past the loaded system weight
Lass es uns für dein Projekt zum Laufen bringen
Bitte geben Sie in Ihrer Anfrage die gewünschte Menge, den Lieferort, die Anbaufläche sowie eventuelle Spannungs- oder Steckeranforderungen an. Spezifikationen, Verfügbarkeit, Versand- und Garantiebedingungen werden in Ihrem schriftlichen Angebot bestätigt.
Referenzumrechnung unter Verwendung des gespeicherten Wechselkurses vom 15.11.2026. Die umgerechneten Beträge stellen kein Angebot dar.
WEITER ERKUNDEN
Alle Produkte ansehenMehr Möglichkeiten für Ihren Raum
Hydroponik & Bewässerung
Yield Lab 600W HPS+MH Cool Tube Hood Reflector Grow Light Kit
QuellenangabeEUR 199.27
Hydroponik & Bewässerung
Yield Lab 600W HPS+MH Air Cool Tube Reflector Digital Grow Light Kit
QuellenangabeEUR 181.15
Hydroponik & Bewässerung
Yield Lab 600w HPS Air Cool Tube Digital Dimming Grow Light Kit
QuellenangabeEUR 172.09
Fragen und Diskussion
Haben Sie eine Frage oder möchten Sie etwas Nützliches teilen? Starten Sie das Gespräch.