Ein vielversprechenderer Weg zum Wachstum. Großhandel direkt ab Werk. Mehr als 15 Jahre wachsende Expertise

Dieser Inhalt ist derzeit in seiner Originalsprache verfügbar.

Belüftung & KlimaGroßhandelsanfrage

4 inch Backdraft Damper

Modell / Artikelnummer: VTBDD4

What a 4 inch Backdraft Damper Is Stopping

Duct size
Four inches, matching a four inch inline fan or run
Duct diameter
4 in
Type
Round backdraft damper, duct insert
Material
Galvanized steel
QuellenreferenzpreisEUR 21.73

Nur zum Vergleich. Fordern Sie Ihren aktuellen Großhandelspreis, die Verfügbarkeit und die Lieferbedingungen an.

Keine Zahlung erforderlich. Ein Gespräch über Ihre Bedürfnisse.

Direkter WerkssupportMehr als 15 Jahre Erfahrung
EIN GENAUERER BLICK

Noch ein paar weitere Informationen zu diesem Produkt

What a 4 inch Backdraft Damper Is Stopping

Product details

  • A duct with nothing in it is a two way street.
  • When the fan is off, outside air walks back down the run, bringing cold, smell and whatever is living in the roof space with it.
  • On a sealed room it also breaks the pressure relationship you built the extraction around.
  • A backdraft damper closes that street in one direction.
  • Two blades sit inside the body, each on its own independent hinge.
  • That independence is the design detail worth paying for, because a single shared shaft means one sticky blade holds the other open.
  • The body is galvanized steel and the whole assembly pushes into the duct, so there is no flange to fit and no transition to build.
  • It installs in any orientation.
  • The blades close onto a neoprene perimeter seal rather than metal onto metal, which is what makes the closure quiet as well as tight.
  • Why Static Pressure Decides Whether It Opens at All
  • One figure matters more on a small duct than anywhere else.
  • The blades need between four and eight hundredths of an inch of static pressure before they lift.
  • That is not very much pressure at all.
  • A small fan at the end of a long flexible run, with a loaded carbon filter in front of it, does not always make it.
  • The symptom is a fan that runs while nothing moves, and the cause looks like a dead fan rather than a shut damper.
  • Two habits between them avoid it entirely.
  • Keep the run short and use rigid duct where the layout allows, since flexible duct costs several times the resistance for the same length.
  • Second, check the damper by hand at commissioning with the fan at its lowest intended speed rather than at full.
  • A unit that will be run at thirty percent overnight needs to open at thirty percent.
  • The damper is sized for a four inch duct and suits the smaller Vortex in-line fans.
  • Duct size: Four inches, matching a four inch inline fan or run
  • Function: Stops air travelling back down the duct when the fan is off
  • Blades: Two, each on an independent hinge so neither can jam the other
  • Seal: A neoprene perimeter gasket rather than metal onto metal
  • Noise: That gasket is what makes the closure quiet as well as tight
  • Body: Galvanized steel throughout the housing and both blades
  • Mounting: The whole assembly inserts into the duct, with no flange to fit
  • Orientation: Installs in any position

Spezifikationen

Duct diameter
4 in
Type
Round backdraft damper, duct insert
Material
Galvanized steel
Mounting
The whole assembly inserts into the duct
Opening pressure
0.04 to 0.08 in of static pressure
Duct size
Four inches, matching a four inch inline fan or run
Noise
That gasket is what makes the closure quiet as well as tight

Lass es uns für dein Projekt zum Laufen bringen

Bitte geben Sie in Ihrer Anfrage die gewünschte Menge, den Lieferort, die Anbaufläche sowie eventuelle Spannungs- oder Steckeranforderungen an. Spezifikationen, Verfügbarkeit, Versand- und Garantiebedingungen werden in Ihrem schriftlichen Angebot bestätigt.

Referenzumrechnung unter Verwendung des gespeicherten Wechselkurses vom 15.11.2026. Die umgerechneten Beträge stellen kein Angebot dar.

LASST UNS GEMEINSAM WACHSEN

Fragen und Diskussion

0

Haben Sie eine Frage oder möchten Sie etwas Nützliches teilen? Starten Sie das Gespräch.

WEITER ERKUNDEN

Mehr Möglichkeiten für Ihren Raum

Alle Produkte ansehen
DER BEGINN VON ETWAS GUTEM

Lass uns dein Projekt ans Licht bringen.

Schildern Sie uns kurz Ihre Anforderungen. Wir nutzen Ihre Angaben, um Ihnen ein passendes Angebot für den Großhandel zu unterbreiten.

Ihre Produktliste

Keine Zahlung. Keine Verpflichtung. Nur ein hilfreiches Gespräch.