Your main grow light- or primary grow light- can do a lot, but it has its limitations. Sometimes your plants can't get the full coverage or intensity they need. Or maybe it can't give them the wavelengths they need to thrive. Enter supplemental lighting.
Whether you're in a tent, in a warehouse, or even a greenhouse, grow rooms thrive with supplemental lighting. And the awesome thing about them is that they'll enhance yield size and quality.
The tricky part is knowing what you need and how to use it. But that's what this guide is for.
When you're looking for a supplemental grow light that'll fill in the wavelengths your primary light leaves behind, this is the light you need.
It offers 4x wavelengths that target growth functions your main light won't: Dark blue (465nm) enhances continued root and leaf growth; deep red light (660nm) to boost meta-topolin production to keep plants green, lush, and promote flower growth; orange (620nm) to boost the yields of your fruiting and flowering plants; and white (6000k) for an extra boost of intensity.
And with a footprint of up to 4x3ft, this is supplemental light for seedlings through harvest.
✓ Supplement for Flowering & Fruiting Plants
✓ Includes 4x Targeted Wavelengths for improved growth
✓ Optimal Pairing: 400w+600w HID's / 200w-450w LED's / 24w-200w T5's
✓ Great Primary Light for Houseplants
When you want more wavelengths that'll pump out lots of leaves, this is the light your plants need.
With over 400x 456nm diodes, this all blue LED grow light enhances photosynthesis. This increased in blue wavelengths means more leaf growth, which has 2 important effects: more light intake and increased flower sites. And with a footprint of 3-12 square feet, each of these lights is the addition to each vegging plant you're growing.
So if you need stronger foliage growth, this grow light will give it to you for 20,000 hours at a mere 50 watts of power (that's less than most grow room fans!).
✓ Increased Light Intake for Stronger Growth & More Flowering Sites
✓ Optimal Pairing: Full Spectrum and Traditional Grow Lights
✓ Primary Light for Clones & Seedlings
If you're working with clones, bonsai's, small flowers, or houseplants that aren't getting what they need with natural light, this is the supplemental light they need.
These 24w lights range from quad-band to tri-band lights, to all blue and all red lights. So these supplemental lights will enhance growth just like their larger counterparts, from foliage growth to flower and fruit production. However, its 4.5sqft coverage area is tailored to give off a stronger, more focused footprint onto smaller canopies.
So by combining this light with your primary light source, your smaller plants will thrive into larger ones.
✓ Addition to Natural Light for Small Flowers, Clones, and Houseplants
✓ Made to Increase Foliage & Flower Growth
✓ Available in 4x Wavelength Combinations
✓ Optimal Pairing: Natural Light or Low Wattage Grow Lights
When your primary light leaves weak spots on large canopies, this is the supplemental light your grow room needs.
Available in 2ft (X40) and 4ft (X80) options, this lights give off a even, 3-6ft wide footprint with an extra 110-160 PPFD of intensity. Compared to square panels narrow coverage and weak spots, these lights supplement your primary light evenly across wide canopies.
They also come in two spectrum combinations: vegging (with heavy blue, white, and easy red diodes) and flowering (heavy reds, orange, white, and blue). So no matter what stage of growth your plants are at, this supplemental light can cover wide canopies for bigger harvests.
✓ Available in 2ft & 4ft Options to Suit Your Grow
✓ 110 (X40) -160 (X80) PPFD Intensity
✓ Optimal Pairing: 400w-1000w HID's / 200-900w LED's
When you're looking for a big burst of energy to supplement your primary light, this is the grow light your plants need.
With a PAR output of at least 420 PPFD, this light fills in gaps on light with intense coverage. It also offers coverage area of around 9 sqft, for supplementing larger, mature plants. And with a color temperature of 5000k, your plants get every wavelength they need to thrive, from vegging through harvest.
for large grow rooms and big plants, this supplemental grow light is designed to give your grow an extra 16,000+ lumens while only using 95 watts of power.
✓ Made with Samsung Doides for Extra Intensity and Lasting Power
✓ Optimal Pairing: 600w+1000w HID's / 300-900w LED's
In the grow room, supplemental lighting is lighting that supplements the light coverage of your primary grow light. They fill in gaps of light your primary light leaves across plant canopines, including:
Dark spots, such as the shaded growth toward the base of plants.
Drop-off's in intensity, like on the outer edges of your primary light's footprint.
Lack of vital wavelengths, like the low amount of red in MH bulbs.
When you fill in those gaps in coverage, you'll increase the quality of your plants and yields, too.
Supplemental lighting comes in T5, CFL, HID, and LED options. But hands-down, the most common and effective type of supplemental lights are LED grow lights.
Advantages of Using Supplemental Lighting
Worse, doubling up on primary grow lights can overwhelm plants- not to mention use double the amount of energy to grow.
But aside from keeping plants from harm, there are three main reasons all growers should use supplemental lights in their grow:
✓ Increased Intensity & Coverage: Supplemental lights fill in those weak points of coverage across plant canopies. Even the most intense primary grow lights have a hard time penetrating deep onto leaves below the top of a canopy. And primary lights lose intensity the further their light spreads, leaving the plants on the outside of the light footprint starving for light. That uneven coverage will lead to smaller, less fulfilling yields.
So by adding supplemental lighting above, below, or on the sides of your growing area will help increase light penetration across your canopy. That increased intensity will lead to larger, higher quality harvests than before.
✓ Enhanced Growth Properties: When a plant's nutrition and environment are on point but they're not getting the growth you're looking for- like lots of leaves or bigger flowers- your plants aren't getting the wavelengths of light they need to perform certain growth processes. Even when the intensity of your light is enough for photosythesis (i.e. growth), it's the abundance of particular wavelengths that helps particular growth functions like root or leaf growth.
For example, the blue wavelengths of light are responsible for chlorophyll production and strong, healthy stems and leaves. So if you're looking for more foliage growth that you're getting from your primary light, you can enhance leaf growth by adding an all blue or blue-forward grow light. In the same way, flower production can be acheived with extra red wavelengths, and IR and UV lights can enhance resin growth that your primary light can't acheive.
✓ Bonus for Greenhouse Growers: Supplemental grow lights speed up the grow cycle of your plants. Changes in sunlight from season to season can really slow your harvests down if you’re relying completely on natural light. But when you introduce supplemental lights, you can easily speed up the grow cycle and even squeeze more cycles into a year than you would be able to otherwise.
When it's time to start looking for supplemental lighting, you'll have three types of lights to choose from: single band, multi-band (aka "traditional"), or full spectrum grow lights.
They all have their own unique qualities they offer your plants.
If you want to increase a specific growth property (like more foliage growth, faster flower blooming, or increased resin production) these are what you need.
Unlike other lights, these give you one specific wavelength of light designed to enhance specific growth patterns. You'll see all blue, all red, along with standalone UV and IR lights, too.
✓ These are great at boosting a specific wavelength of light that your primary doesn't have an abundance of.
X They have limited spectrums, so only one property can be enhanced at a time.
Common Spectrums: All Blue, All Red, All UV, All IR
Multi-band lights give plants multiple targeted wavelengths, enhancing multiple growth properties of their plants.
For example, dual band grow lights mix red and blue wavelengths to give plants a boost of foliage and flower growth at the same time.
✓ These enhance multiple growth properties at the same, filling in gaps in wavelengths your primary light leaves.
X These require the most research, as you want to ensure you get the right wavelength combination for your plants.
Common Spectrums: Dual Band (red/blue), Tri-Band (red/blue/white), Quad Band (red/blue/orange/white)
Full spectrum supplemental lighting targets a broad spectrum of light to enhace intensity of your primary grow light.
To do this, these lights use white diodes. These white diodes contain virtually all wavevlengths of light. So while they may not enhance individual growth properties, they do a great job adding extra PAR across your grow room.
✓ These are the at boosting the PPFD intensity of your primary lights.
X They may not add anything to your plants other than intensity, so targeting specific properties of growth is not possible.
Common Spectrums: 3000k, 5000k, 6500k
Choosing the Right Supplemental Lighting
This takes a three-pronged approach: finding the right wavelength(s) for your plants, finding the ideal intensity for your grow, and choosing the light with the coverage area.
⦁ Blue wavelengths will lead to increased production and strength of leaf/foliage growth. More blue light means there's more leaves to capture light, as well as more flowering sites.
⦁ Red/orange wavelengths play two important functions: branch growth and strengthing, as well as flower and fruit stimulation. Strong branches can hold more leaves, flower, and fruit.
⦁ Violet wavelengths are high-energy wavelengths that increase chrlorophyll production to strengthen plant cells and enhance flavor/aroma properties.
Questions & discussion
Have a question or something useful to share? Start the conversation.