A brighter way to grow. Factory-direct wholesale. 15+ years of growing expertise
GROWING KNOWLEDGE

How Many Grow Lights Do Your Plants Need?

How much light is enough to promote excellent growth in my plants?

How Many Grow Lights Do Your Plants Need?

How much light is enough to promote excellent growth in my plants?

That’s a question a lot of growers ask themselves at some point when trying to decide on the grow light for their plants. Whether you're new to growing or you've been growing for a long time, figuring out how much light you need can be tricky.

If you’re feeling overwhelmed, don’t worry.

Research Your Plants Specific Lumen/PAR Needs

Determining Coverage for Your Canopy

How to Calculate the Number of Lights You Need

Determining the Necessary Wattage for Your Plants

Finding the Right Lights and Intensity for Your Grow Room

If you’re ready to grow your own plants and want to know how much light they’ll need, read on.

Knowing how much light your plants need isn’t as simple as choosing any light and then hoping for the . You’ll have to take into account two important factors:

Plant Coverage — This is pretty self explanatory and means the amount of light each individual plant will receive.

Canopy Coverage — This type of coverage refers to the light that will be spread over the entire group of plants in your grow tent, otherwise known as the canopy.

Whether you’re going with plant coverage or canopy coverage, it’s essential to know how much PAR or lumens you’re going to need for optimal growth. Remember:

PAR, or photosynthetically active radiation, is used to measure the intensity of a grow light. This is the primary measurement of HID and LED grow lights because it tells you the power a light will have on your plants.

Lumens measure the brightness of a grow light, like the brightness of HPS grow lights, MH grow lights, and CMH grow lights.

You might be asking yourself, “Why do I need to factor lumens/PAR? Can’t I just use a certain number of watts per square foot in my grow room?” While you could just base the amount of necessary light for your plants on the size of your grow room or grow tent, doing so won’t give you enough light intensity for all of your plants.

Plants require a certain amount of lumens or PAR to achieve optimal growth.

Now, the coverage area of any given light will have varying PAR/lumens the further out from the center you go. That's why if you have a large growing area and need to use multiple lights, PAR and lumens is going to be especially handy.

This will allow you to figure out how much light they need more accurately than just trying to get a certain amount of wattage per square foot.

It’s important that you research the lighting needs of the plants you plan on growing. While you could potentially get decent results from simply estimating, you’ll see the yields and the healthiest plants with proper lighting.

Weak Light Intensity: If you don’t provide enough light for your plants, they’ll struggle to grow. This can lead to stunted plants and weak results. Not to mention, you simply won’t get the flavors and aromas you want out of your plants.

Too Much Light Intensity: Too strong of a light will also cause problems for your grow. If you give your plants more light intensity than what they need, you could end up burning them.

If you want to determine how much PAR or how many lumens you’ll need for each of your plants, it’s pretty simple. All you have to do is a bit of research to find the right values for the plants you want to grow.

Leafy greens like lettuce and spinach, for example, would need a PAR value of around 200.

Meanwhile tomatoes, which flower and produce fruit, would need a PAR value of 400 to 500.

Once you’ve figured out the lumens/PAR your plants will need, finding the right light or lights for your grow tent will be a lot easier.

Determining the Coverage for Your Canopy

But to figure that out, you've got to first measure the size of the overall canopy you need to light.

Note: the size of your growing area is important because it's the area you can fit a certain amount of plants in.

Measure your canopy's depth: Don’t overlook the depth of your canopy. You’ll need lights that are strong enough to penetrate deep into your plants. Simply covering the tops of your plants won’t be enough.

By knowing the PAR/Lumens your plants need, you'll be able to determine how strong of a light you need.

By knowing how much area you need to cover, you can figure out how strong of a light you'll need so that it can spread the light it gives off the higher its raised.

How to Figure Out Many Grow Lights You Actually Need

As you can probably tell by now, asking yourself how many grow lights you need upfront is a bit too tricky and broad. Ultimately, a better question to ask yourself is:

How much strength and light intensity do my plants need, and how many lights will I need to achieve this goal?

Thankfully, you now know how to get the answer to that question. You’ve determined the amount of lumens or PAR that each of the plants you’re growing needs. You’ve also figured out the light intensity required for the size and depth of your canopy.

Now that you have a general idea of how grow lights, lumens, and PAR work in your grow room, the question remains:

How exactly do you calculate the number of grow lights necessary for a successful harvest?

Here are some step-by-step instructions to help you figure out how many grow lights you'll need.

Research the minimum and maximum requirements for your plants. Tomatoes, for example, have a minimum PAR requirement of 400 and a maximum PAR requirement of 500.

Remember: The outer edges of your grow light's coverage are weaker. If you're only using a single light, keep in mind that the outer parts of your canopy will have weaker light intensity. Depending on the plant, you may need to invest in more than one light to ensure your entire canopy is receiving strong doses of light.

If you have a small grow space but you want to grow large plants, you may only be able to fit 1 to 2.

If you're growing small plants, you'll realistically be able to fit more in that same small grow space.

Whatever the case may be, make sure you account for their growth so you have enough space for fully-formed plants.

Consider your grow light placement if you're using multiple lights. If you need even coverage across your canopy, aligning multiple lights will essentially create a third intense point by overlapping the light coverage on the edge of each grow light. This will give you 2 or more strong points of light coming from the center of the light footprint, as well as intense light in the places where intensity would normally drop off.

Figuring out the necessary lumens/PAR for your plants will determine the wattage you need from your grow lights.

When growing with HIDs (HPS and MH lights, for example), consider these options:

This light intensity is enough to provide coverage for 1 to 2 plants.

As such, it could provide solid coverage for up to 4 plants.

That’s sufficient to provide coverage for up to 6 plants.

If you’re using LED lights in your grow tent, you should consider these LEDs and their values:

This makes it recommended for 1 to 2 plants.

That means its got a minimal footprint of 16 sqft and will provide coverage for 7 to 10 plants.

As you can see, grow lights with different wattages provide coverage for different numbers of plants. The key is to find a grow light that has the right amount of lumens or PAR for the plants you’re growing — and from there you’ll decide on wattage.

Need Stronger Coverage? Here's What to Do

Now, lumens and PAR begin to weaken on the outer edges of that footprint. You’ll want to keep your plants well within that footprint. If you’re growing a lot of plants in a larger space, your bet is to install multiple grow lights to overlap those weak points.

For more intense coverage, one option is to lower your light closer to your plants. The lower a light is, the more intensely your plants will feel it. However, doing that will decrease your coverage area.

For increase intensity, you can add more light(s) to your grow. This has the potential for increase PAR significantly, so it' important to raise or dim your lights if it's starting to get overwhelming for your plants.

Need to Cover More of Your Canopy with Light? Here's the Solution

If you need to cover a large area (like in a commercial grow, for example), you’ll want to use multiple high lumen output grow lights that you can hang higher than usual. But there are a couple of key things to look out for when you need a larger footprint across your canopy:

Hanging Lights Higher Increases Coverage Area, Lowers Intensity- To get more coverage, the first thing to do would be to raise your lights. Keep in mind the higher you position the lights in your grow tent, the weaker their intensity will be on your plants. So be aware of how much light you're sacrificing if you need to raise your light.

Re-evaluate your needs- If your plants need more intensity and/or coverage than you're giving them and you're running multiple lights already, evaluate the lighting you have. You may need to upgrade your lighting to stronger lights.

Now that you know the importance of lumens and PAR in relation to your grow room, it’s time to pick out the light or lights for your grow room.

Editor’s Choice: Yield Lab 600W HPS Air Cool Hood Reflector Grow Light Kit

This HID kit will give you great coverage and light intensity for up to 6 plants. And because it includes an HPS bulb, your plants will be good to go for their vegetative and flowering stages.

Though HIDs are known for higher temperatures than LEDs, you can keep the light’s heat controlled with the digital dimming ballast. On top of that, this kit also features an air cool hood, so your grow room’s temperatures will never reach extreme levels.

Lumen Output: 90,000 lumens (HPS bulb)

Coverage: 4 plants (2x4 grow tent or 4x4 grow tent)

for 5ft x 5ft Grow Spaces: Yield Lab Pro Series 1000W HPS+MH Air Cool Hood Double Ended Complete Grow Light Kit

The Yield Lab Pro Series 1000W HPS+MH Air Cool Hood Double Ended Complete Grow Light Kit is all about big coverage and intensity.

This HPS and MH grow light kit will provide the necessary lumens to up to 6 plants in a 5x5 grow tent through the vegging and flowering stages. The power of this 1000w light is for providing the coverage and depth to reach all of your plants.

LET’S GROW TOGETHER

Questions & discussion

0

Have a question or something useful to share? Start the conversation.

THE START OF SOMETHING GOOD

Let’s bring your project to light.

Tell us a little about what you need. We’ll use your details to prepare a relevant wholesale response.

Your product list

No payment. No obligation. Just a helpful conversation.